wireless DIN


  Industrial radio control




Performance
■  1 Mile (2.km) line-of-sight with with 938432 or 938438 antenna
■  3 Miles (5 km) line-of-sight with 938433 antenna
■  Dry isolated contact input N/O
■  Relay output SPST N/O 

Installation features
■  Operates in the license-free 433 MHz ISM band
■  Easy installation,
Matched set No programming required
■  Panel mount or clip snaps onto DIN-35 rail 


Applications: Industrial Monitoring, Pump control, Monitor remote instruments, sensors and
detectors, Packing and mobile system, SCADA installations, Factory process control and alarms.

 



 





Part #         Channels

943301   433-1 Single (1)
943302   433-2 Two  (2)   
943304   433-4 Four (4)

 

Please request a quotation



   Specifications        Digital Transmitter
Supply power 12/24 VDC @ 400 mA
Inputs  N/O Normally Open,  digital dry contact
Transmitter power per FCC Part 15.249,  50mV/m @ 3m
Transmission Digital Encoded Gaussian_frequency-shift_keying
Channels 16 addresses per system  GFSK
Connection Open wire
Response Loop 500 msec
Weight 2.4 lb (1.64kg)  each unit
Dimensions 9 x 9 x 4 in. (230 x 230 x 100 mm)

 

   Specifications       Digital Receiver 
Supply power 12/24 VDC  @ 300 mA
Outputs  Relay 5Amp SPST 240V Class 2 
Frequency 433 MHz  • License free  Industrial
Configuration DIP switch factory preset
Transmission mode Supervised Tx Rx carrier
Compliance FCC CFR part 15.247
Antenna Z 50 Ohm SMA connector
Ambient temp  14° to 140° F (-10° to 60° C)
Enclosure Plastic  ABS NEMA1, IP22

 


Antenna Sold Separately
938433  Yagi Antenna 12 E
  14 dBi  3 Mile
 Length: 43", Weight: 3.lb

with 10 ft coax cable and connector

  938433    $299.99 

 

938432 Antenna 3 E Yagi
 7 dBi  1 Mile
Length: 18", Weight: 1.lb
with 10 ft coax cable and connector

  938432    $179.99 

 

938438 Omni 3 dBi Antenna
Length: 37", Weight: 3.lb
with 10 ft coax cable and connector

  938438   $169.99 

 

938011
0 dBi Short range
7" Omni Antenna 
5ft coax cable  SMA

  938011    $29.99 

 


DISCLAIMER:  Radio control equipment is not to be used in life safety. Radio control systems are subject to applications, environmental and atmospheric conditions,
   We are not liable of failures on miss applications, radio black outs or interruption of the transmissions.  Radio Installations shall be performed by a certified professional.

 

     Copyright ©  Electrodepot. All rights reserved